Doing a good job in the maintenance and maintenance of petroleum instruments is related to the availability of petroleum instruments, the utilization rate, and the rate of experiment output, and the success rate of experiments. Therefore, you should understand the general knowledge of petroleum instrument maintenance and maintenance, and master the basic skills of maintenance and maintenance.
Once the instrument adsorbs dust and dirt, it not only affects the performance of petroleum instruments, shortens the service life, directly affects the experimental results, but also affects the aesthetics and the physical and mental health of the experimenter.
Petroleum equipment will be covered with dust and dirt during use or storage. The main purpose is to prevent dust and dirt. Frequent dust removal and cleaning is an important part of maintaining and maintaining petroleum equipment.
I. Dust removal of petroleum instruments
Dust is mostly tiny dust particles with a small amount of static electricity, which often floats in the air and moves with the airflow, and when it encounters objects, it adheres to it, almost permeating. Dust attached to the model specimen will affect its color and luster. Dust on moving parts will increase wear and tear. Dust on electrical appliances will cause short circuits and leakages in severe cases. Dust on precious precision instruments will cause the instrument to be scrapped.
There are many ways to remove dust, which mainly depends on the condition of the dust attachment surface and the degree of dust attachment. In the dry air, if there is less dust or the dust has not been dampened, it can be wiped with a dry cloth, a towel brush, a soft-bristled brush, etc. to remove the dust on the general instrument; the dust inside the instrument can be peeled唧, ear-cleaning ball-type air blower to remove dust, you can also use a vacuum cleaner to clean the dust; diagonally, the dust in the slit can be combined with the above several methods to remove dust.
However, for precious precision instruments, such as optical instruments, meter heads, etc., dust removal using the above method will also damage the instrument. At this time, special dust removal tools should be used to remove dust, such as wiping with lens paper and cotton balls with alcohol.
When the air is moist and the dust has formed scale, the dust should be wiped with a wet cloth. Dirt in the corners and seams can be removed with a sharpened soft strip first, and then wiped with a wet cloth. Do not wipe with a damp cloth. If the dirt is not easy to wipe clean, use a cotton ball moistened with alcohol or ether to wipe or clean.
2. Petroleum instrument cleaning
Petroleum equipment will be stained with greasy, glue, sweat and other dirt during use, and rust and mildew will be produced when it is not stored properly. These dirt will have extremely adverse effects on the life and performance of the instrument.
The purpose of cleaning is to remove dirt from the instrument.
Generally, there are two types of methods for cleaning petroleum instruments. One is mechanical cleaning, that is, cleaning with a shovel, scraper, brush or the like;
The specific cleaning method depends on the condition of the dirt attached surface and the nature of the dirt.
Company: Nantong Huaxing Petroleum Instrument Co., Ltd.
Contact: Tang Shengrong
Address: No. 18 Rixin Road, Hai'an County, Jiangsu Province